Stermont Arcade
💬 Ask about this item on WhatsApp
AICO 2HP Deep Well Submersible Pump 210m Head product image

Buy AICO 2HP Deep Well Submersible Pump 210m Head

M-Pesa checkout · Delivery to all 47 counties · Pickup at Sarit Centre, Nairobi

KSh 31,199 / piece

In stock

Buy AICO 2HP Deep Well Submersible Pump 210m Head online in Kenya from Stermont Arcade. Pay by M-Pesa and get delivery to all 47 counties.

Order on WhatsAppAdd to Cart / Pay with M-Pesa
✓ Instant M-Pesa Checkout • ✓ Coordinated via Westlands Office • ✓ Same-Day Nairobi Delivery & Sarit Centre Pickup • ✓ 47-County Shipping

About AICO 2HP Deep Well Submersible Pump 210m Head

Product overview

The AICO 2HP Deep Well Submersible Pump is an electric pump listed for deep boreholes and wells where a high lifting head is required. The supplier specifies a 2HP (1.5kW) motor, maximum head of 210 metres, a 1.25–1.5-inch outlet and an operating submergence depth of up to 150–180 metres. The page lists a 220–240V, 50Hz single-phase supply, Grade 304 stainless-steel housing, a high-resistance thermoplastic or stainless-steel impeller and integrated thermal overload protection. These specifications make it a higher-power option for deep-well applications, but the actual flow at the required head must be checked before purchase.

Key features & benefits

The 210m maximum head is the main performance figure supplied for this model. It represents the upper lifting capability under specified conditions and should not be mistaken for the expected flow at that height. The 2HP motor rating is 1.5kW. The supplier lists an outlet diameter between 1.25 and 1.5 inches depending on configuration. The pump is designed to operate submerged in the water source, with the supplier specifying an operational submergence depth of 150–180 metres. Confirm the exact model variant and permitted installation depth with the seller. The supplier describes a Grade 304 stainless-steel housing and a high-efficiency copper motor. It also mentions floating impeller technology intended to handle minor sediment and sand particles. This does not mean the pump is suitable for abrasive slurry or heavy solids; confirm the allowable sand content and water quality. Integrated thermal overload protection is listed to help protect the motor when temperature rises above its safe operating range.

Specifications & product details

Brand: AICO. Pump type: deep-well submersible pump. Motor power: 2HP / 1.5kW. Maximum head: 210m. Outlet: 1.25–1.5 inches, standard configuration. Submergence depth: up to 150–180m operational, according to the supplier. Supply: 220–240V AC, 50Hz, single phase. Housing: Grade 304 stainless steel. Impeller: high-resistance thermoplastic or stainless steel. Motor: copper-wound, according to the supplier. Protection: integrated thermal overload. Supplier-listed price: KSh 23,999. Maximum flow, pump diameter, cable length and included control equipment are not stated in the available product details; obtain confirmation before ordering.

Uses & applications

This pump may suit a deep borehole or well where the required lifting head is high and the casing diameter, water level and electrical supply are compatible. It may be considered for domestic water supply, farm storage tanks or commercial water systems. The correct choice depends on the pumping water level, desired delivery elevation, daily volume, pipe route and flow required. A pump capable of a high head is not automatically the best choice if the installation needs a high flow at a lower head. HEAD AND FLOW CALCULATION Calculate the total dynamic head from the pumping water level to the discharge point, including friction losses in the rising main, valves and fittings. The supplier's 210m maximum head should not be treated as the normal working point. Request the pump curve or a written flow estimate at the expected head. Confirm the actual water level while pumping and account for drawdown. Check that the outlet size matches the selected pipe and that the pipe can withstand the operating pressure. BOREHOLE AND ELECTRICAL CHECKS Measure the internal casing diameter and confirm the pump's physical diameter and installation clearance. Verify the intended submergence depth and keep the unit within the manufacturer's limits. The supplier lists a 220–240V, 50Hz single-phase supply. A qualified electrician should confirm cable size, voltage drop, earthing, overload protection and control equipment. Ask whether a control box is supplied and whether the motor requires an external starter or other protection. INSTALLATION AND SAFE USE Lower and retrieve the pump with suitable lifting equipment or a support rope; never use the power cable as a lifting line. Support the discharge pipe independently. Protect all electrical joints from water and mechanical damage. Do not allow dry running unless the manufacturer specifically permits it. Isolate power before maintenance. If the water contains sand, confirm the permitted concentration and use the installation method recommended by the supplier. MAINTENANCE AND

Buying guide

Inspect the cable, pipework, non-return valve, control equipment and water source periodically. If flow decreases, check for drawdown, blockage, leaks, excessive friction losses or electrical issues. Follow the manufacturer's service intervals and use qualified technicians for repairs. Compare deep-well pumps by flow at operating head, maximum head, motor power, casing diameter, outlet, supply voltage, permitted submergence and warranty support. Confirm availability of replacement impellers, seals and motor components before ordering.

Frequently asked questions

What is the motor power?
2HP / 1.5kW.

What is the maximum head?
210m.

What outlet size is listed?
1.25–1.5 inches.

What voltage does it use?
220–240V single phase, 50Hz.

How deep can it be submerged?
The supplier lists 150–180m operational submergence; confirm the exact model limit.

What is its flow rate?
Not stated in the available listing; request the pump curve.

Ordering & delivery

Stermont Arcade lists the AICO 2HP deep-well pump at KSh 31,198.70, calculated from the supplier's KSh 23,999 price plus the agreed 30% markup. Confirm operating flow, casing fit and included accessories before ordering.

Product Uses & Practical Buying Guide

Check the product details, exact model or size and the manufacturer's instructions before use. Confirm that it suits your intended setup and any accessories or compatibility requirements. Ask us on WhatsApp if you need help checking a detail.

Product Price, M-Pesa Checkout & Ordering in Kenya

AICO 2HP Deep Well Submersible Pump 210m Head costs KSh 31,199 / piece at Stermont Arcade and is in stock. Add it to your cart, pay by M-Pesa and enter the M-Pesa code from your SMS, or order on WhatsApp. Buying in bulk? Message us for a quote.

Delivery to Nairobi & All 47 Counties

Orders to Nairobi usually arrive the same day or the next day, and the other counties usually within 1 to 3 days. We confirm the delivery fee for your location before you pay. Prefer store pickup? Collect at The Sarit Centre, Karuna Road, Westlands, available for confirmed orders by appointment; contact us before visiting. See shipping and Nairobi delivery and pickup.

Buy AICO 2HP Deep Well Submersible Pump 210m Head in Nairobi, Kiambu, Nakuru, Kisumu, Eldoret & Mombasa

Stermont Arcade delivers to Nairobi, Kiambu, Nakuru, Kisumu, Eldoret, Mombasa and every other county in Kenya. Nairobi orders usually arrive the same day or the next day, and other counties usually within 1 to 3 days.

How to order

  1. Add the product to your cart, or message us on WhatsApp.
  2. Pay by M-Pesa and enter the M-Pesa code from your SMS.
  3. We confirm the delivery fee for your town before you pay, then dispatch your order.

Call +254 748 888 230 or order on WhatsApp.

Frequently asked questions

How can I buy AICO 2HP Deep Well Submersible Pump 210m Head in Kenya?
Order AICO 2HP Deep Well Submersible Pump 210m Head online at Stermont Arcade, pay by M-Pesa and get delivery to all 47 counties in Kenya. You can also order on WhatsApp.

Do you deliver AICO 2HP Deep Well Submersible Pump 210m Head outside Nairobi?
Yes. We deliver to Nairobi, Kiambu, Nakuru, Kisumu, Eldoret, Mombasa and all 47 counties, usually within 1 to 3 days. We confirm the delivery fee before you pay.

What is the price of AICO 2HP Deep Well Submersible Pump 210m Head?
AICO 2HP Deep Well Submersible Pump 210m Head costs KSh 31,199 at Stermont Arcade. Check the product price above for the size you want.

Can I pick up AICO 2HP Deep Well Submersible Pump 210m Head in Nairobi?
Yes. Collect at The Sarit Centre, Karuna Road, Westlands, open daily 8 AM to 8 PM. Confirm stock on WhatsApp first.

Check the exact item before ordering

This listing is for AICO 2HP Deep Well Submersible Pump 210m Head. Match the product name and any size, model or variant shown above to the item you need. If a specification is not listed, ask us to confirm it before payment.

If a specification is missing, ask Stermont Arcade on WhatsApp before placing your order.

Explore Water Tanks & Irrigation and related buying guides

Browse the main category, compare related products and read practical guides before choosing.

Shop the main category

Related products

Helpful guides

More from Stermont Arcade