
Buy B&G Robco Soil Rodding Tool for Termite Treatment
M-Pesa checkout · Delivery to all 47 counties · Pickup at Sarit Centre, Nairobi
In stock
Buy B&G Robco Soil Rodding Tool for Termite Treatment online in Kenya from Stermont Arcade. Pay by M-Pesa and get delivery to all 47 counties.
Order on WhatsAppAdd to Cart / Pay with M-PesaAbout B&G Robco Soil Rodding Tool for Termite Treatment
Product overview
The B&G Robco Soil Rodding Tool is a specialist applicator for trained termite technicians carrying out approved sub-slab and soil treatment procedures. Its extended steel shaft, footplate and delivery tip are designed to help place treatment through soil access points beneath or alongside concrete slabs. Correct use depends on the building construction, treatment label, soil conditions and a documented termite management plan. Confirm the shaft length, tip configuration and connection fittings before purchase. This is an application tool only; treatment chemicals are not included. Do not drill or inject into unknown services, and follow all safety and product-label requirements. B&G describes its Robco Soil Rodding Tool with a 40-inch pipe, a 5/8-inch 360-degree delivery tip and a footplate to assist rodding into soil. The manufacturer positions it as a sub-slab injector for applying termiticide beneath concrete, tile or wood flooring to reach voids for termite control. The exact assembly in this listing should be checked against the manufacturer's current product sheet. Do not assume that a valve, pump, hose, pressure regulator or additional tip is included unless the package details say so. Subterranean termites can enter structures from soil and may exploit joints, service penetrations and concealed spaces. A soil rodding tool is designed to help a trained operator place a labelled liquid treatment at selected locations in the soil or beneath a suitable slab. The 360-degree tip distributes material around the delivery point when used as specified. It is not a general-purpose garden lance, drain rod or tool for injecting arbitrary chemicals into walls and floors. A proper termite job begins with inspection of the building, construction type, slab edges, expansion joints, service penetrations, drainage and visible termite evidence. Identify electrical, water, gas and communication services before drilling or inserting a rod. Review the treatment product label and safety data sheet to confirm that sub-slab or soil application is permitted. Establish the intended treatment points and follow the labelled rate and procedure rather than improvising spacing, pressure or volume. Before use, inspect the pipe, footplate, tip, valve and connections for wear, blockage or leakage. Confirm that the selected components match the B&G tool and the treatment system. Use the footplate and rodding approach described in the equipment instructions, maintaining stable control of the shaft and delivery valve. Do not force the rod through an obstruction or exceed the equipment's rated pressure. Application quality depends on soil conditions, the treatment label and correct equipment setup. B&G offers several termite tools, pipes, valves and tips that may look similar but serve different applications. Verify the tool model, pipe diameter, thread or coupling, tip type and valve before ordering spares. A 5/8-inch rodding pipe should not be assumed to fit every 7/16-inch termite pipe or another manufacturer's valve. Confirm whether the supplied unit is a complete tool or an individual component. Ask the supplier to list the included parts in writing if the work plan requires a specific kit. Termiticide handling must follow the product label, Kenyan registration requirements and the site's risk assessment. Trained operators should wear the specified personal protective equipment, control access to the treatment area and prevent spills or runoff. Do not inject near unknown services, drains, wells or water bodies. Observe label requirements for mixing, ventilation, re-entry and waste disposal. A robust metal tool does not eliminate chemical exposure hazards or make an unapproved treatment method acceptable. After the job, clean or flush the delivery system only as directed by the equipment maker and the chemical label. Manage rinse water or chemical residue under the applicable waste procedure; do not discharge it into storm drains or surface water. Inspect the tip for blockage, examine seals and valve operation, and check the pipe for bends or corrosion. Store the equipment securely and maintain a service record so damaged parts are not returned to use. Professional termite contractors in Kenya may use soil rodding equipment on suitable residential, commercial and institutional projects where the approved treatment plan requires sub-slab or soil placement. Soil type, building design, drainage and service routes vary significantly between sites. Select the method only after inspection and use a pesticide product registered for the intended application. The tool itself does not establish a chemical's legal status, a treatment rate or a warranty against future termite activity. This B&G Robco Soil Rodding Tool is listed at KSh 26,500. Confirm the 40-inch pipe, 5/8-inch 360-degree tip, footplate, valve and included fittings with the seller. Termiticide, pump, hose, pressure equipment, drill, PPE and labour are not included unless explicitly stated. It is an application tool, not a treatment chemical. Its use must match the structure, product label and operator training. Retain the model and service documentation after purchase.
Safety information
This is a pest-control or agricultural chemical product. Use it only for the crop, pest, site and application method expressly authorised on the current Kenya-approved product label. Read the full label before opening or use. Follow the label exactly for personal protective equipment, dilution, application, ventilation, re-entry period, pre-harvest interval, environmental restrictions and any other precautions. Do not guess a dose, mix it with another product, or use it on food, animals, people or surfaces unless the label specifically permits that use. Keep the original container tightly closed and locked away from children, unauthorised persons and animals, and separate from food, drink and animal feed. Prevent spills and contamination of drains, wells, streams and other water sources. Do not eat, drink or smoke while handling; wash hands and exposed skin after handling. Never reuse an empty pesticide container; follow the label and approved local hazardous-waste collection or disposal instructions. In case of suspected poisoning or significant exposure, seek urgent medical attention and show the product label. Kenya PCPB poison information hotlines listed in its labelling guidance: 0800 720 021 or 0800 730 030.
Target Pests & Where to Use This Product
Use B&G Robco Soil Rodding Tool for Termite Treatment only as directed on the product label: check the listed target, approved use, application rate and interval. Follow the specified protective equipment and keep children, pets and food away where the label requires it. Looking for help with kunguni, mchwa, mende, mbu or panya? Not sure it fits your problem? Ask us on WhatsApp before you order.
Product Price, M-Pesa Checkout & Ordering in Kenya
B&G Robco Soil Rodding Tool for Termite Treatment costs KSh 26,500 at Stermont Arcade and is in stock. Add it to your cart, pay by M-Pesa and enter the M-Pesa code from your SMS, or order on WhatsApp. Buying in bulk? Message us for a quote.
Delivery to Nairobi & All 47 Counties
Orders to Nairobi usually arrive the same day or the next day, and the other counties usually within 1 to 3 days. We confirm the delivery fee for your location before you pay. Prefer store pickup? Collect at The Sarit Centre, Karuna Road, Westlands, available for confirmed orders by appointment; contact us before visiting. See shipping and Nairobi delivery and pickup.
Buy B&G Robco Soil Rodding Tool for Termite Treatment in Nairobi, Kiambu, Nakuru, Kisumu, Eldoret & Mombasa
Stermont Arcade delivers to Nairobi, Kiambu, Nakuru, Kisumu, Eldoret, Mombasa and every other county in Kenya. Nairobi orders usually arrive the same day or the next day, and other counties usually within 1 to 3 days.
How to order
- Add the product to your cart, or message us on WhatsApp.
- Pay by M-Pesa and enter the M-Pesa code from your SMS.
- We confirm the delivery fee for your town before you pay, then dispatch your order.
Call +254 748 888 230 or order on WhatsApp.
Check that the product is registered
In Kenya only pest control products registered by the Pest Control Products Board (PCPB) may be sold and used. Compare the registration number on the pack with the lists on the PCPB website before you use any chemical.
Frequently asked questions
How can I buy B&G Robco Soil Rodding Tool for Termite Treatment in Kenya?
Order B&G Robco Soil Rodding Tool for Termite Treatment online at Stermont Arcade, pay by M-Pesa and get delivery to all 47 counties in Kenya. You can also order on WhatsApp.
Do you deliver B&G Robco Soil Rodding Tool for Termite Treatment outside Nairobi?
Yes. We deliver to Nairobi, Kiambu, Nakuru, Kisumu, Eldoret, Mombasa and all 47 counties, usually within 1 to 3 days. We confirm the delivery fee before you pay.
What is the price of B&G Robco Soil Rodding Tool for Termite Treatment?
B&G Robco Soil Rodding Tool for Termite Treatment costs KSh 26,500 at Stermont Arcade. Check the product price above for the size you want.
Can I pick up B&G Robco Soil Rodding Tool for Termite Treatment in Nairobi?
Yes. Collect at The Sarit Centre, Karuna Road, Westlands, open daily 8 AM to 8 PM. Confirm stock on WhatsApp first.
What to check before buying this crop or pest-control product
Before buying B&G Robco Soil Rodding Tool for Termite Treatment, make sure the product label matches the pest, crop, site or surface you need to treat. A product name alone is not enough to establish suitability.
- Check PCPB registration details and confirm that the label lists your intended pest, crop, site or use.
- Compare the formulation and pack size on the label; check the expiry date and seal when it arrives.
- Read the label for protective equipment, application directions, restricted-entry instructions and any pre-harvest interval. Never guess a dose or mix products.
If a specification is missing, ask Stermont Arcade on WhatsApp before placing your order.
Explore Termite Control and related buying guides
Browse the main category, compare related products and read practical guides before choosing.
Shop the main category
Related categories
Related products
Helpful guides
Safe use of B&G Robco Soil Rodding Tool for Termite Treatment
- Read the whole label before you buy or mix. The label is the legal instruction for crops, pests, rates and safety.
- Look for the PCPB registration number on the pack. Do not buy chemicals that carry none.
- Wear gloves, a mask or respirator, eye protection and long protective clothing when mixing and spraying, and wash well afterwards.
- Keep chemicals in their original container, out of reach of children, pets and livestock. Never reuse empty containers for food or water.
Need advice on the right product, rate or crop? Ask us on WhatsApp or read how to read an insecticide label.
More from Stermont Arcade
Buy B&G Versatool 415 Injection ToolKSh 18,500
Buy Bipronex Cockroach Gel Bait 5gKSh 3,900
Buy Blue-Touch Jumbo Rat Glue Traps 2 PackKSh 350
Buy Bottom Door Sealer Strip 1mKSh 499
Buy Bromarat 0.005 RB Rodent Bait 25 gFrom KSh 850
Buy Bugnil 20EC InsecticideKSh 750