Stermont Arcade
💬 Ask about this item on WhatsApp
Ingco WAPS002 Automatic Water Pump Control 1100W product image

Buy Ingco WAPS002 Automatic Water Pump Control 1100W

M-Pesa checkout · Delivery to all 47 counties · Pickup at Sarit Centre, Nairobi

KSh 5,200 / piece

In stock

Buy Ingco WAPS002 Automatic Water Pump Control 1100W online in Kenya from Stermont Arcade. Pay by M-Pesa and get delivery to all 47 counties.

Order on WhatsAppAdd to Cart / Pay with M-Pesa
✓ Instant M-Pesa Checkout • ✓ Coordinated via Westlands Office • ✓ Same-Day Nairobi Delivery & Sarit Centre Pickup • ✓ 47-County Shipping

About Ingco WAPS002 Automatic Water Pump Control 1100W

Product overview

The Ingco WAPS002 Automatic Pump Control is an electronic pressure and flow controller designed to automate compatible water-pump operation. The supplier lists a starting pressure of 1.5bar, maximum allowable pressure of 10bar, maximum rated current of 10A and rated voltage of 220–240V at 50/60Hz. It has a G1-inch male inlet and G1-inch female outlet and an IP65 protection rating. The unit is intended to start a connected pump when pressure falls as water is drawn and stop it when demand ends. This can reduce the need for manual switching in compatible domestic and light-commercial water systems.

Key features & benefits

The WAPS002 detects changes in pipeline pressure and water flow to control pump start and stop cycles. The listed starting pressure is 1.5bar and the maximum allowable pressure is 10bar. The controller supports 220–240V AC at 50/60Hz and a maximum rated current of 10A. The supplier also lists a maximum power capacity of up to 1100W. The G1-inch male inlet and G1-inch female outlet provide standard threaded connections for compatible pipework. The IP65 protection rating indicates a dust-protected enclosure with resistance to water jets, but it does not mean the unit can be submerged.

Specifications & product details

Brand: Ingco. Model: WAPS002. Product type: automatic water-pump pressure controller. Starting pressure: 1.5bar. Maximum allowable pressure: 10bar. Maximum rated current: 10A. Rated voltage: 220–240V AC. Frequency: 50/60Hz. Maximum supported power: up to 1100W, according to the supplier. Connections: G1-inch male inlet and G1-inch female outlet. Protection rating: IP65. Supplier-listed price: KSh 4,000. Confirm compatibility with the pump's rated current, motor starting current, pressure range and plumbing arrangement before installation. HOW IT WORKS When water is drawn from the system, pressure in the pipe falls. The controller detects the pressure change and starts the connected pump. When water demand stops and the pressure/flow conditions return to the controller's stop threshold, it stops the pump. This automatic cycle can make a compatible pump system easier to operate. The supplier describes it as helping prevent dry running, but buyers should confirm the exact dry-run protection behaviour and restart logic in the manufacturer's manual. Do not assume it replaces every required motor-protection device.

Uses & applications

The WAPS002 may suit a compatible domestic booster pump, a small water-supply installation or a light irrigation system where automatic pump control is required. It can reduce manual switching when a tap or outlet is opened and closed. It may also help maintain a more convenient water supply for a home or small business. It is not a pump itself; it is a controller that must be paired with a compatible pump. Confirm that the pump's voltage, current, power and pressure characteristics fall within the controller's ratings. COMPATIBILITY CHECKS Before purchase, check the pump's rated voltage, running current, starting current and motor power. The controller is listed for 220–240V and 10A maximum rated current, with up to 1100W supported by the supplier. Motors can draw a higher current during startup, so verify the manufacturer's requirements and do not exceed the controller's rating. Check the pump's pressure and flow arrangement, and ensure the 1-inch threaded inlet and outlet match the pipework. Ask whether an additional contactor or motor starter is required for the pump. INSTALLATION AND ELECTRICAL

Safety information

Installation should be completed by a qualified plumber or electrician familiar with pump-control systems. Fit the controller in the correct flow direction and use compatible threaded fittings. Protect electrical connections and provide suitable isolation and earthing. The IP65 rating is not permission to submerge the controller or expose it to standing water. Install it in a location protected from flooding, direct impact and extreme weather. Follow the wiring diagram and commissioning instructions supplied by Ingco. OPERATION AND MAINTENANCE Check the system for leaks, blocked filters and air in the pipework if the pump starts or stops unexpectedly. Inspect electrical connections and pipe fittings periodically. If the pump does not start, check power supply, pressure conditions, flow, controller settings and pump compatibility. If it does not stop, check for leaks, continuous water demand or incorrect installation. Isolate the electrical supply before inspection. Do not open the controller enclosure unless qualified to do so.

Buying guide

Compare automatic pump controllers by voltage, maximum current, supported motor power, starting pressure, maximum system pressure, connection size, protection rating and dry-run protection behaviour. Confirm whether the model supports the type of pump being used and whether it requires a separate pressure tank or other components. The WAPS002 is listed with 1.5bar start pressure, 10bar maximum pressure, 10A current and IP65 protection. Confirm warranty and technical support before purchase.

Frequently asked questions

What model is this?
Ingco WAPS002.

What is the starting pressure?
1.5bar.

What is the maximum allowable pressure?
10bar.

What voltage does it use?
220–240V AC, 50/60Hz.

What is the maximum current?
10A.

What connections does it have?
G1-inch male inlet and G1-inch female outlet.

Is it waterproof?
It is rated IP65, but it must not be submerged.

Ordering & delivery

Stermont Arcade lists the Ingco WAPS002 controller at KSh 5,200, calculated from the supplier's KSh 4,000 price plus the agreed 30% markup. Confirm pump compatibility, motor current and installation requirements before ordering.

Product Uses & Practical Buying Guide

Check the product details, exact model or size and the manufacturer's instructions before use. Confirm that it suits your intended setup and any accessories or compatibility requirements. Ask us on WhatsApp if you need help checking a detail.

Product Price, M-Pesa Checkout & Ordering in Kenya

Ingco WAPS002 Automatic Water Pump Control 1100W costs KSh 5,200 / piece at Stermont Arcade and is in stock. Add it to your cart, pay by M-Pesa and enter the M-Pesa code from your SMS, or order on WhatsApp. Buying in bulk? Message us for a quote.

Delivery to Nairobi & All 47 Counties

Orders to Nairobi usually arrive the same day or the next day, and the other counties usually within 1 to 3 days. We confirm the delivery fee for your location before you pay. Prefer store pickup? Collect at The Sarit Centre, Karuna Road, Westlands, available for confirmed orders by appointment; contact us before visiting. See shipping and Nairobi delivery and pickup.

Buy Ingco WAPS002 Automatic Water Pump Control 1100W in Nairobi, Kiambu, Nakuru, Kisumu, Eldoret & Mombasa

Stermont Arcade delivers to Nairobi, Kiambu, Nakuru, Kisumu, Eldoret, Mombasa and every other county in Kenya. Nairobi orders usually arrive the same day or the next day, and other counties usually within 1 to 3 days.

How to order

  1. Add the product to your cart, or message us on WhatsApp.
  2. Pay by M-Pesa and enter the M-Pesa code from your SMS.
  3. We confirm the delivery fee for your town before you pay, then dispatch your order.

Call +254 748 888 230 or order on WhatsApp.

Frequently asked questions

How can I buy Ingco WAPS002 Automatic Water Pump Control 1100W in Kenya?
Order Ingco WAPS002 Automatic Water Pump Control 1100W online at Stermont Arcade, pay by M-Pesa and get delivery to all 47 counties in Kenya. You can also order on WhatsApp.

Do you deliver Ingco WAPS002 Automatic Water Pump Control 1100W outside Nairobi?
Yes. We deliver to Nairobi, Kiambu, Nakuru, Kisumu, Eldoret, Mombasa and all 47 counties, usually within 1 to 3 days. We confirm the delivery fee before you pay.

What is the price of Ingco WAPS002 Automatic Water Pump Control 1100W?
Ingco WAPS002 Automatic Water Pump Control 1100W costs KSh 5,200 at Stermont Arcade. Check the product price above for the size you want.

Can I pick up Ingco WAPS002 Automatic Water Pump Control 1100W in Nairobi?
Yes. Collect at The Sarit Centre, Karuna Road, Westlands, open daily 8 AM to 8 PM. Confirm stock on WhatsApp first.

Check the exact item before ordering

This listing is for Ingco WAPS002 Automatic Water Pump Control 1100W. Match the product name and any size, model or variant shown above to the item you need. If a specification is not listed, ask us to confirm it before payment.

If a specification is missing, ask Stermont Arcade on WhatsApp before placing your order.

Explore Water Tanks & Irrigation and related buying guides

Browse the main category, compare related products and read practical guides before choosing.

Shop the main category

Related products

Helpful guides

More from Stermont Arcade