
Buy FNIRSI WMT-10 Moisture Meter
M-Pesa checkout · Delivery to all 47 counties · Pickup at Sarit Centre, Nairobi
In stock
Buy FNIRSI WMT-10 Pinless Wood Moisture Meter online in Kenya from Stermont Arcade. Pay by M-Pesa and get delivery to all 47 counties.
Order on WhatsAppAdd to Cart / Pay with M-PesaAbout FNIRSI WMT-10 Pinless Wood Moisture Meter
Product overview
The FNIRSI WMT-10 is a non-destructive moisture meter for checking moisture levels in timber and selected building materials during property inspections. Its pinless sensing approach helps technicians scan surfaces without leaving probe holes, while the display provides a quick reading for comparison across inspected areas. Moisture readings can help identify conditions that may contribute to timber deterioration and attract wood-damaging pests, but the meter does not detect termites directly and cannot confirm an infestation. Use it as one part of a wider inspection that includes visual checks, tapping and appropriate specialist tools. Verify material mode and calibration before recording readings. FNIRSI identifies the WMT-10 as an inductive, pinless instrument with a 2. 4-inch colour screen, 0. 1% display resolution and a maximum sensing depth of up to 17mm. The sensor area is listed as 40. 5 by 40. 5mm. Published ranges are 0–75% for hardwood and softwood, 0–25% for plaster wall and 0–43% for brick wall, with a stated measurement error of ±1. 5%. These are instrument specifications, not universal building moisture limits or a guarantee that every surface can be measured accurately. The instrument provides separate modes for hardwood, softwood, plaster wall and brick wall. Select the mode that best matches the surface being tested before taking a reading. A timber setting should not be used as though it were a calibrated plaster-wall setting. Different species, density, coatings and construction assemblies can influence readings. Compare like materials under similar conditions and consult the manufacturer's instructions when a surface is composite, painted, laminated or otherwise outside the listed measurement modes. Begin a building survey with a visual assessment of the timber, wall finish, plumbing routes, roof junctions, bathrooms, kitchens and other locations where moisture may accumulate. Use the meter to scan accessible areas and record the location, material mode and displayed value. Take several readings across the inspection area rather than relying on one point. Repeat measurements around an area of concern to understand whether the condition is localised or spread across a wider surface. Dated photographs and written notes help explain why a location was tested. The WMT-10 can help identify differences in moisture conditions in selected materials, but it does not locate a leak, identify the source of water or diagnose termite activity. A damp reading may relate to plumbing, roof leakage, condensation, ground moisture or another building issue. Termite confirmation requires other evidence, such as mud tubes, galleries, damaged timber or live insects. Use the meter as supporting information in a building or pest inspection, not as a stand-alone verdict or substitute for a qualified specialist. The 2. 4-inch colour display is intended to make readings easier to view during field work. FNIRSI lists sound and colour alarms, a temperature display, a built-in flashlight and the ability to save and review up to 30 sets of readings. The alarm thresholds should be understood in relation to the selected material mode. Stored readings can support a small inspection route, but larger jobs should also use a written report with room references, photographs and dated observations. Do not interpret an alarm as an automatic instruction to treat a building. Pinless meters sense a zone beneath the sensor rather than a single point at the surface. The maximum depth is specified as up to 17mm, but actual response can vary with material, contact, surface flatness and construction. Metal behind a wall, foil layers, dense coatings or uneven surfaces may affect the reading. Do not compare results from different modes as if they were directly equivalent. When a result has legal, structural or contractual importance, obtain confirmation using an appropriate reference method and follow the instrument manual. Keep the sensor area clean and avoid scratching or striking it against masonry. FNIRSI lists a 1000mAh rechargeable battery and adjustable auto-power-off intervals of 5, 10 or 15 minutes. Charge using the supplied or manufacturer-approved cable and store the meter dry, away from extreme heat and impact. Check the device's response and settings before beginning a site survey. Keep the manual and purchase details so the correct procedure can be followed if the firmware or measurement behaviour changes. The WMT-10 may support inspections in Kenyan homes, hotels, rental properties, schools, timber stores, warehouses and building-maintenance projects. Damp areas near bathrooms, roofs and plumbing can be worth checking when investigating timber deterioration or conditions that may attract wood-damaging pests. For pest-control teams, moisture observations can strengthen a report when combined with visual evidence and building history. It does not replace a qualified building surveyor, plumber or termite specialist where those services are needed. This FNIRSI WMT-10 is listed at KSh 9,500. Confirm the model marking, screen, sensor condition, charging cable, manual and warranty terms for the actual unit.
Safety information
This is a pest-control or agricultural chemical product. Use it only for the crop, pest, site and application method expressly authorised on the current Kenya-approved product label. Read the full label before opening or use. Follow the label exactly for personal protective equipment, dilution, application, ventilation, re-entry period, pre-harvest interval, environmental restrictions and any other precautions. Do not guess a dose, mix it with another product, or use it on food, animals, people or surfaces unless the label specifically permits that use. Keep the original container tightly closed and locked away from children, unauthorised persons and animals, and separate from food, drink and animal feed. Prevent spills and contamination of drains, wells, streams and other water sources. Do not eat, drink or smoke while handling; wash hands and exposed skin after handling. Never reuse an empty pesticide container; follow the label and approved local hazardous-waste collection or disposal instructions. In case of suspected poisoning or significant exposure, seek urgent medical attention and show the product label. Kenya PCPB poison information hotlines listed in its labelling guidance: 0800 720 021 or 0800 730 030.
Target Pests & Where to Use This Product
Use FNIRSI WMT-10 Pinless Wood Moisture Meter only as directed on the product label: check the listed target, approved use, application rate and interval. Follow the specified protective equipment and keep children, pets and food away where the label requires it. Looking for help with kunguni, mchwa, mende, mbu or panya? Not sure it fits your problem? Ask us on WhatsApp before you order.
Product Price, M-Pesa Checkout & Ordering in Kenya
FNIRSI WMT-10 Pinless Wood Moisture Meter costs KSh 9,500 at Stermont Arcade and is in stock. Add it to your cart, pay by M-Pesa and enter the M-Pesa code from your SMS, or order on WhatsApp. Buying in bulk? Message us for a quote.
Delivery to Nairobi & All 47 Counties
Orders to Nairobi usually arrive the same day or the next day, and the other counties usually within 1 to 3 days. We confirm the delivery fee for your location before you pay. Prefer store pickup? Collect at The Sarit Centre, Karuna Road, Westlands, available for confirmed orders by appointment; contact us before visiting. See shipping and Nairobi delivery and pickup.
Buy FNIRSI WMT-10 Pinless Wood and Wall Moisture Meter in Nairobi, Kiambu, Nakuru, Kisumu, Eldoret & Mombasa
Stermont Arcade delivers to Nairobi, Kiambu, Nakuru, Kisumu, Eldoret, Mombasa and every other county in Kenya. Nairobi orders usually arrive the same day or the next day, and other counties usually within 1 to 3 days.
How to order
- Add the product to your cart, or message us on WhatsApp.
- Pay by M-Pesa and enter the M-Pesa code from your SMS.
- We confirm the delivery fee for your town before you pay, then dispatch your order.
Call +254 748 888 230 or order on WhatsApp.
Check that the product is registered
In Kenya only pest control products registered by the Pest Control Products Board (PCPB) may be sold and used. Compare the registration number on the pack with the lists on the PCPB website before you use any chemical.
Frequently asked questions
How can I buy FNIRSI WMT-10 Pinless Wood and Wall Moisture Meter in Kenya?
Order FNIRSI WMT-10 Pinless Wood and Wall Moisture Meter online at Stermont Arcade, pay by M-Pesa and get delivery to all 47 counties in Kenya. You can also order on WhatsApp.
Do you deliver FNIRSI WMT-10 Pinless Wood and Wall Moisture Meter outside Nairobi?
Yes. We deliver to Nairobi, Kiambu, Nakuru, Kisumu, Eldoret, Mombasa and all 47 counties, usually within 1 to 3 days. We confirm the delivery fee before you pay.
What is the price of FNIRSI WMT-10 Pinless Wood and Wall Moisture Meter?
FNIRSI WMT-10 Pinless Wood and Wall Moisture Meter costs KSh 9,500 at Stermont Arcade. Check the product price above for the size you want.
Can I pick up FNIRSI WMT-10 Pinless Wood and Wall Moisture Meter in Nairobi?
Yes. Collect at The Sarit Centre, Karuna Road, Westlands, open daily 8 AM to 8 PM. Confirm stock on WhatsApp first.
What to check before buying this crop or pest-control product
Before buying FNIRSI WMT-10 Pinless Wood Moisture Meter, make sure the product label matches the pest, crop, site or surface you need to treat. A product name alone is not enough to establish suitability.
- Check PCPB registration details and confirm that the label lists your intended pest, crop, site or use.
- Compare the formulation and pack size on the label; check the expiry date and seal when it arrives.
- Read the label for protective equipment, application directions, restricted-entry instructions and any pre-harvest interval. Never guess a dose or mix products.
If a specification is missing, ask Stermont Arcade on WhatsApp before placing your order.
Explore Termite Control and related buying guides
Browse the main category, compare related products and read practical guides before choosing.
Shop the main category
Related categories
Related products
Helpful guides
Safe use of FNIRSI WMT-10 Pinless Wood and Wall Moisture Meter
- Read the whole label before you buy or mix. The label is the legal instruction for crops, pests, rates and safety.
- Look for the PCPB registration number on the pack. Do not buy chemicals that carry none.
- Wear gloves, a mask or respirator, eye protection and long protective clothing when mixing and spraying, and wash well afterwards.
- Keep chemicals in their original container, out of reach of children, pets and livestock. Never reuse empty containers for food or water.
Need advice on the right product, rate or crop? Ask us on WhatsApp or read how to read an insecticide label.
Buy Fuko-Kil Rat Poison
Buy Fumakilla Vape Liquid Refill 45g
Buy Fumakilla Vape Mat E 30 Mat Refill Pack
Buy Glue Book Mouse Traps
Buy Goizper IK Vector Control Pump Public Health Sprayer 10L
Buy Goodknight Multi Insect Aerosol 600ml